User's Manual

V1 January 2015
da Vinci Jr.1.0
P 3
A
A: Filament movement area
B: Feed module
C: Print head
D: Filament
E: Print bed
F: SD card port
(Storage format: FAT32)
G: Control and display panel
H: Front cover
B
C
D
E
F
G
H
• Do not place the printer in humid or dusty environment such as bathrooms and high traffi c areas.
• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or
tumble and it may cause serious injury.
• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.
Please keep the front door closed during printing to avoid injury.
．
Cleaning Brush
Product Overview
Accessory Checklist
Important Safety Instruction for Use of Maintenance Tools
Important Safety Instruction
．
Scraper
．
USB Wire
．
Power Cord
．
Bundled fi lament
．
Bed Tape X 3pcs
．
Filament spool axle ring
．
Power Adapter
．
Guide tube
．
Cleaning Wire x 5
．
SD Card
• The maintenance tools provided should be only handled by an adult. Please keep the tools away
from children.
• The scraper is used to remove the object from the print bed when printing has fi nished and the print
bed is cool.
• Store the gear cleaning brush properly. This tool shall only be used to clean the specifi ed parts of the
machine and should not be used for the cleaning of other parts to prevent damaging the machine.
USB Port
Power Switch
Power Connector