User's Manual

Ver.1

March 2015

P 13

da Vinci Jr.1.0

BUILD FROM CARD

JOG MODE

HOME AXES

“HOME AXES” moves the extruder to the right back corner, and the print bed to the top.

“JOG MODE” is used to manually move the extruder and the print bed.

3 sample models are built-in the printer. You may begin your ﬁ rst 3D prints with the samples.

To move the print bed, select “Z-AXIS” to proceed.

1.Select a sample to print

1.Select “X-AXIS” (to move right

and left) or “Y-AXIS” (to move

backwards and forwards).

2.Select desired increment of travel with

and

buttons, and press (or hold)

or button for desired

direction to move the extruder.

To home axes:

To move the extruder:

To print a sample:

Select “YES” to proceed.

jog mode

axis

build FROM CARD

demo

DEMO

start building

yes

axis ok exit

－ ■

001mM

＋

010mm

020mm

▲

2.Put the bed tape on the print bed.

3.Select "YES" to start printing

4.Remove the printed object when the printing has

finished and the print bed has descended.The bed

tape is reusable and it can be replaced when it's worn.

home axes

are you sure

YES

UTILITIES