User's Manual

Ver.1 March 2015
P 4
da Vinci Jr.1.0
Open the box and remove the accessories and cushions.
Remove the securing styrofoam next to the print bed.
Remove the plastic bag and the tapes.
Remove the securing cardboard of the printing head and
then remove the entire cardboard. You may push the print
nozzle towards the back out of the cardboard and bend
the securing cardboard downwards for an easy removal.
Raise the paper cardboard slightly upwards
so that the paper cardboard is detached
from the styrofoam slot at the bottom.
Insert the SD card that came with the printer into
your computer or download the latest XYZware from
the offi cial Website and install it on the computer.
Use the USB cable to connect the printer to PC.
Connect the power cord to the printer then turn on
the power switch.
h
US
B
bl
h
i
Unpacking the Product
1
2
3 4
5
6 7
Note: please use the original power adapter and power cord along with the printer in order to
prevent product damage or personal hazards caused by differences in voltage specifi cations.