User's Manual

Ver.1

March 2015

P 5

da Vinci Jr.1.0

Note: Please follow these steps and ensure that the guide tube is properly installed before

starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt ﬁ lament feed.

Reminder: If you are not too sure where the feed module tube port is,

you may open the casing of the machine to see the indication label.

Ensure that the guide tube has been tightly

inserted into the port to complete the guide tube

installation process.

Take out the guide tube and plug in one

end of the tube into the ﬁ lament feed port

on the printing module.

To ensure that the guide tube is well inserted into the

ﬁ lament feed port, you may gently press on the springs

around the feed port to make the insertion an easier

process.

Direct the guide tube from the tube

movement area out of the machine and

then insert the other end of the ﬁ lament

tube into the feed module tube port.

Installing the Accessories

．

Guide tude