User's Manual

-6-
ENG
234Filament is unloaded from extruder
automatically. Pull fi lament out from
the guide hole when prompted.
When fi lament is pulled out,
press "OK".
Remove cartridge locker
and the catridge.
important safety Instruction
Information and usage of the advanced maintenance tools
The maintenance tools provided should be only handlde by an adult. Please keep tools
away from children. Incorrect handling or maintenance of the printer may cause damage
to the product or personal injury.
Ý
Scraper
Scraper is used to remove printed object from print bed when printing fi nished.
(Caution: Do not remove the printed object while the print bed is hot.)
ï
Copper Brush
Cooper brush is used to clean and remove moiten filament left on the tip or surface of the
extruder(s) and inside the drive gear. When the printer falls to "Calibrate" consistently, please
use the cooper brush to clean and remove the fi lament pieces from the extruder(s).
ï
Cleaning Wire
Cleaning wire is used to remove the fi lament left in the path inside the clogged nozzle when the
moiten fi lament has affect printing quality.
(Caution: Print bed may be hot during cleaning, please keep away from the platform to avoid personal injury.)
When cleaning the print nozzle, gear or fi lament path please ensure to keep hands clear of the
print bed which may be hot.
PRINTING
Unload fi lament
1 Select "Filament" > "Cartridge1" (or "Cartridge 2") > "Uninstall" on the screen.
Note: Please always complete the procedure for "FILAMENT UNLOADING" before changing a new cartridge.
Never cut off the fi lament from the extruder to prevent extruders from clogged.
Product Manual & Maintenance Tools