User Manual

• Before using this printer, remove all fixed materials from the
extruder module and print bed. Switching on the printer without
removing these fixed materials may damage the machine.
• Be sure to remove the plastic packaging and 4 clips from the
shafts as illustrated on the right.
• Do not use the printer in dusty high humidity or outdoor environments.
• Place the printer on a stable and even surface to avoid it falling and causing serious injury.
• Do not put your hand into the machine during operation to avoid collision risk due to
movement of the machine or to avoid burn due to high temperature.
1. Quick Guide, Warranty Card
Keep original packaging materials in case you need to send your
unit back for repair during the warranty period.
If other packing materials are used instead, the printer may
become damaged during transportation. In such a situation,
XYZprinting reserves the right to charge a repair fee.
Notes
13. Cleaning Wire x 511. Cleaning Brush
2. Power Adapter 3. Power Cord 4. USB Wire 5. Extruder Module
7. Guide Tube 8. Bundled Filament 9. Filament Spool Ring
(installed on the filament spool)
6. Scraper
14. Leveling tool
12. Feeding Path Cleaning Wire
10. Bed Tape X 3pcs （Only replace
the reusable tape when it is worn.）
16. Feeding Tube Grip X1
(For replacing and installing
the Feeding Tube Grip,
please watch the tutorial
video on XYZprinting official
website)
15. PET Protection cover
Unpacking
Important Safety Notes
Accessory Checklist
- 3 -