User Manual

V1
-8-
• Please slice the 3D model with XYZware_Nobel and save it in .3w/.3wn
format. Files in other format or not sliced with XYZware_Nobel will not be
shown.
• For correct file name display, please name the file with English and
Japanese (Katakana preferred) alphabets and numbers.
* Sample files are provided in the bundled USB drive. To print the sample, please slice the file with XYZware_Nobel before printing.
Note
PRINT FROM USB
"Layer Height" indicates the resolution of a print.
Using thinner layers will make higher quality
prints but will also take longer to print.
Printing setup varies based on the color and
material of the resin. Please set the option based
on the resin cartridge installed on the printer
before printing. It is advise to include color setting
in filename for instant distinction in the future.
The setting of Quality has impact on the smooth-
ness of the surface of the printout. When printing
with "Good" quality, the surface with less features
will be more smooth. With the setting, it will take
slightly longer for printing.
Check "Brim" for the 3D objects that has less
contact with the platform to increase adhesion.
Options under Export :
④
①
②
③
①
②
③
④
PC-link Printing via XYZware_Nobel
Before printing from PC, please first install XYZware_Nobel on your device. Connect your PC to the printer before installing the
software, or the installation may be incomplete."XYZware_Nobel" Installer can be found in the bundled USB drive or at XYZprint-
ing website:
http://support.xyzprinting.com/global_en/Support/download (log in is required)
Minimum system requirements for XYZware_Nobel:
System RAM: 4GB and above
Graphics RAM: 1GB and above (OpenGL 2.1+ compatible)
Hard disk space: 300MB and more
Operating system requirements : Windows 7/8+ (32bits and 64 bits)
Mac OSX 10.8+
A.
B.
Import objects in .stl/.3wn format: Open file browser and select the .stl or .3wn files to print. ".3wn" format is sliced by
XYZware_Nobel based on the printer type selected. For the file set to slice for printer type other than "Nobel 1.0A", it will not be printed on this
printer.
Export to .3wn format: After selecting a desire printout setting, click on "Export" to save the model to a sliced .3wn file. Once the file is sliced, you
may skip repeating settings in the future.
(Overview of XYZware_Nobel)
Functions:
Insert USB flash drive to the USB
drive port at the back of the printer.
press ▼ to browse the menu, and press [OK] to select a file to
proceed:
XYZ_KEY
►Mini_nobel
my_nobel
XYZ_KEY2
START PRINTING?
XYZ_KEY
NO
►YES
A
G
H
I
J
K
L
M
N
O
B C D E F
Good