User's Manual

Specification
Nobel 1.0 3D Printer
Print Technology
UV Light Source
Maximum Build Size
X/Y Axis Resolution
Z Axis Resolution
File Format
Operating Conditions
Stereolithography (SL)
UV Laser λ 405nm (100mW)
128 x 128 x 200mm
5”x 5”x 7.8”
0.3mm
0.025/0.05/0.1 mm
.stl & .3w (sliced with XYZware)
Temperature: 18-35℃/64.4-95℉
Humidity: 40-80% RH (no condensation)
USB Wire & USB drive
100-240V 50/60Hz 60W
280 x 337 x 590 mm
11”x 13.2”x 23.2”
9.6 KG
Photopolymer Resin
Windows 7/8 and above
Connectivity
AC Input
Printer Dimension
Net Weight
Print Material
OS Support
V1
-12-
● Error Code 2001: Resin cartridge not found
Suggestion:
Make sure resin cartridge is placed correctly and NFC tag is in place under the bottle.
If the NFC label is missing, please contact customer service center.
● Error Code 2004: Lid not covered during printing
Suggestion:
Place the lid on the printer before printing. If the lid is placed correctly, please
remove the lid, select "INFO">"SENSOR STATUS", tap the lid sensor and see if the
status of "C" switches from 0 to 1. If the value doesn't switch accordingly, then the
sensor is malfunctioning.
Contact the service center after you have checked the status of the printer.
● Error Code 2002: UV laser module not calibrated
Suggestion:
Contact customer service center directly.
● Error Code 2003: Resin cartridge empty
Suggestion:
Resin cartridge is empty based on the record of the NFC tag. Select "INFO">"RESIN STATS" to check cartridge level. When
"REMAINING" is shown as "0%", then the resin cartridge should be empty. Please install another XYZprinting resin cartridge
before printing.
● Error Code 2005: Unrecognized resin tag
Suggestion:
Check the record of the resin cartridge by selecting "INFO">"RESIN STATS". If the display shows "INVALID RESIN TAG", please
change to XYZprinting resin cartridge.
● Error Code 2006: Unsupported file format
Suggestion:
"Print from USB" supports only .3w format. Please select files in the supported format.
● Error Code 2007: File too large
Suggestion:
Please select a .3w file, size no more than 200MB.
● Error Code 2020: Printer is busy
Suggestion:
Wait until the printer finishes current task. If the error persists when the printer is idle, please try to restart the printer.