User's Manual

INFO
V1
-7-
Under “Info” menu, you can check the statistics and firmware version of the printer, status of resin cartridge
installed, and information on XYZprinting.
SYSTEM VERSION
Firmware version is shown here. To ensure optimal printing performance, it is advised to keep the firmware up to
date. To check for firmware updates, please go to XYZware.
SYSTEM VERSION
1.1.A
[OK] TO RETURN
Select a language and press [OK] to change the setting.
The content may look like this:
RESIN STATUS
“Resin Status” provides the information on cartridge level (see REMAINING), and the capacity, color and material of
the resin. Press▼to read the second page.
RESIN STATUS 1/2
REMAINING 10%
CAPACITY 500g
[OK] TO NEXT
RESIN STATUS 2/2
COLOR GREY
[OK] TO RETURN
SENSOR STATUS
When you encounter exceptional status during the operation of the printer, you may check the status of each sensor
here. The information is especially helpful for troubleshooting.
SENSOR STATUS
C:0 Z-T:1 Z-B:1
T:1 L:0
[OK] TO RETURN
HELP
The URL to XYZprinting website can be found here. You may go to the website for the latest information, product
documents, tutorial video and more.
HELP
XYZPRINTING.COM
[OK] TO RETURN
How to read the satus:
C:1 – Lid (Top cover) covered; C:0 – Lid not covered
Z-T:1 – Platform at top; Z-T:0 – Platform away from top
Z-B:1 –Platform at bottom; Z-B:0 - Platform away from bottom
T:1 – Tank in place; T:2 – Tank not installed
L:1 – Tank level low; L:0 – Tank full or tank not installed