User's Manual

• Please slice the 3D model with XYZware and save it in 3w format. Files in other format or not sliced with XYZware will
not be shown.
• For correct file name display, please name the file with English and Japanese (Katakana preferred) alphabets and
numbers.
Note
PRINT FROM USB
V1
-8-
PC-link Printing via XYZware for Nobel Series
Before printing from PC, please first install XYZware for Nobel Series on your device. "XYZware for Nobel Series" Installer can be
found in the bundled USB drive and at XYZprinting website:
http://support.xyzprinting.com/global_en/Support/download (log in is required)
Minimum system requirements for XYZware for Nobel Series:
System RAM: 4GB and above
Graphics RAM: 1GB and above (OpenGL 2.1+ compatible)
Hard disk space: 300MB and more
Operating system requirements for XYZware for Nobel Series : Windows 7/8+ (32bits and 64 bits)
A.
B.
Import objects in .stl/.3w format: Open file browser and select the .stl or .3w files to print. ".3w" format is sliced by XYZware based on the printer
type selected. For the file set to slice for printer type other than "Nobel 1.0", XYZware for Nobel Series may not import it.
Export to .3w format: After selecting a desire printout setting, click on "Export" to save the model to a sliced . 3w file. Once the file is sliced, you
may skip repeating settings in the future.
A
G
H
I
J
K
L
M
N
BCD EF
(Overview of XYZware for Nobel Series)
Functions:
Insert USB flash drive to the USB
drive port at the back of the printer.
press ▼ to browse the menu, and press [OK] to select a file to
proceed:
FILE LIST [1/10]
XYZ_KEY.3w
►Mini_nobel.3w
my_nobel.3w
START PRINTING?
XYZ_KEY
NO
►YES