User's Manual

Always remove the platform before removing the resin tank
to avoid dripping leftover material on printer surface.
Note
① Remove the platform
Wear gloves before removing the prints. Turn the platform
locker anticlockwise until it stops. And pull the platform to
remove it.
Scrap off the print gently to avoid damaging the surface of
the platform.
Note
② Use the scraper to remove print
V1
-9-
Operation Flow
① Click "Import" to import a .stl/.3w file to the virtual platform.
② Adjust the placement, angle and size of the object with "Move", "Rotate" and "Scale" buttons on the left as desired.Please note that .3w file is
unadjustable.
③ Click "print" and setup printing preference based on the features of the prints, and click "Print" to slice and send the file for printing.
"Layer Height" indicates the resolution of a print. Thinner layer leads to
more dedicated finish, however it takes longer for printing.
Printing setup varies based on the color and material of the resin.
Please set the option based on the resin cartridge installed on the
printer before printing. It is advise to include color setting in filename
for instant distinction in the future.
Check "raft" for 3D oject that has less contact with the platform to
increase adhesion.
For file slicing issue, you may retry slicing with this option. XYZware for
Nobel Series will try to repair any modelling issue while slicing.
For objects with overhanging structure, "support" structure is required
for printing. Check "Support" and select a desire density for support.
Denser support structures will prolong the printing.
For objects with slope, check "slope" to add supports on
slope structure to enhance the stability during printing.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
Save as .stl file: Save all objects on the platform to a single stl file. Any adjustment to the size or placement of the objects will apply to the stl file.
Setup printing preference and send the objects for printing: Once your device is connected to the printer, click "Print" to open printout setting
window (options are the same as "Export" window). Setup printing preference based on the features of the objects and hit "Print" to proceed.
Setup interface language, display unit and etc.
Info/Software & firmware update: Apply printer firmware and XYZware for Nobel Series updates when prompt by the software for stable printing
performance.
Zoom in/out: Zoom in or out the platform to view the details of objects.
Switch views: Switch views with a click to view objects from different angles.
Move the object: move the object along x, y or z axis. You may also press and hold ALT key and drag the mouse to move the object horizontally.
Rotate the object: adjust the angle of the object around x, y or z axis. Flipping the object around to adjust the face on the platform may help to
enhance printing performance. Increasing the contact area between the object and the platform may help to enhance printing quality and
strength.
Resize the object: Scale the object as you desire. The adjustment to the object on the platform will not affect the size of your original file.
View info of the object: check the dimension and location of the object, so you can tell the size of the object easily.
Remove the object from the platform: select an object and click the option to delete it from the platform. Or you may press Delete key to remove
the object.
View printer status
Options under Export:
③
④
①
②
⑤
⑥
①
②
③
④
⑤
⑥
Printed Object Removal and Cleaning
When removing prints from the printer, follow the procedure to post-process the object and maintain your printer.
Color