Safety data sheet

ManualsBrandsXYZPRINTING Manuals3D PrintingNobel 1.0 3D printer Stereolithography

Material Safety Data Sheet

Product Name : UV CURABLE RESIN_PHOTOPOLYMER

Company

Address

Information Phone No.

Emergency Phone No.

1.COMPANY IDENTIFICATION

XYZprinting, Inc.

No.147, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City, Taiwan (R.O.C.)

886-2-7705 8001

2.HAZARD IDENTIFICATION

Classification of the substance or mixture：Non Hazardous Material

Label elements：─

Symbol: ─

Signal word: ─

Hazard substance: ─

Hazard statement: ─

Precautionary: ─

Statements: ─

Other hazards：Slight irritation to skin, heat generation when polymerization, carbon oxide generation when

decomposition by heat.

3.COMPOSITION / INFORMATION ON INGREDIENTS

Substance Identity

CAS No.

Approx. Weight (%)

Urethane Acrylate

Confidential

35~50

Acrylic Monomer

Confidential

40~50

Photoinitiator

Confidential

0~5

4.FIRST AID MEASURES

The first-aid measures for different exposure routes：

Inhalation：If overcome by exposure, remove victim to fresh air immediately. Give oxygen or

artificial respiration as needed. Obtain emergency medical attention. Prompt action is

essential.

Skin contact：Immediately remove contaminated clothing. Wash skin thoroughly with mild

soap/water. Flush with lukewarm water for 15 minutes. If sticky, use waterless

cleaner first. Seek medical attention if ill effect or irritation develops.

Eyes contact：In case of eye contact, immediately rinse with clean water for 20-30 minutes. Retract

eyelids often. Obtain emergency medical attention.

Ingestion：If large quantity swallowed, give lukewarm water (pint) if victim completely conscious/alert.

Do not induce vomiting/risk of damage to lungs exceeds poisoning risk. Obtain emergency

medical attention.

The most important symptoms and hazardous effects：Slight skin irritation

The protection of first-aiders：Wear C class protective equipment and first aid in safety area.

Notes to physicians：Slight skin irritation, Symptoms may include localized redness or rash and swelling

of the affected area, Symptoms may be delayed.

1/5

Summary of content (5 pages)

PAGE 1
/5 Material Safety Data Sheet Product Name : UV CURABLE RESIN_PHOTOPOLYMER 1.COMPANY IDENTIFICATION Company Address Information Phone No. Emergency Phone No. XYZprinting, Inc. No.147, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City, Taiwan (R.O.C.) 886-2-7705 8001 886-2-7705 8001 2.
PAGE 2
/5 5.FIRE-FIGHTING MEASURES Suitable fire extinguishing media：Water, foam, carbon dioxide or dry chemical. Specific hazards may be encountered during fire-fighting： High temperatures, inhibitor depletion, accidental impurities, or exposure to radiation or oxidizers may cause spontaneous polymerizing reaction generating heat / pressure. Closed containers may rupture or explode during runaway polymerization.
PAGE 3
/5 8. EXPOSURE CONTROLS MEASURES Engineering controls：1. Using no spark, grounding ventilation system, and separate from general ventilation system. 2. Exhaust waste gas to outdoor, and take applicable measure to protect environment. 3. Using local exhaust ventilation and closed processing system when mass production. 4. Complement exhaust air by ventilation system with supply plenty fresh air.
PAGE 4
/5 10.CHEMICAL STABILITY AND REACTIVITY INFORMATION Chemical Stability：Stable on normal condition. Possible hazardous reactions occurring under specific conditions： Heat and pressure generation when polymerization and the result in closed container broken and cracked. Conditions to be avoided：High temperatures, localized heat sources (i.e., drum or band heaters), oxidizing conditions, freezing conditions, direct sunlight, ultraviolet radiation, inert gas blanketing.
PAGE 5
/5 13.WASTE DISPOSAL MEASURES Methods of waste disposal： 1. Residues and spilled material may be hazardous waste due to potential for internal heat generator. Disposal must be in accordance with applicable federal, state, or local regulations. 2. The container for this product can present explosion or fire hazards, even when emptied. To avoid risk of injury, do not cut, puncture, or weld on or near this container.