User's Manual

-19-
Printer Cleanup and Maintenance
1. Please refer to P14 for cleanup operation of the print platform and the resin tank.
2. Uncured resin in the tank can be left for future printing. To prevent dust from accumulating on the resin, always cover the lid over the printer after removing any residue
from the tank or the platform.
3. Place the printer away from direct sunlight or UV lighting, even if the lid is covered, or resin in tank may cure and solidify.
Post-Process Your Prints
Remove Support Structure
Use pliers or other tools to remove the support structure from the cleaned prints to ensure perfect finish.
Empty Uncured Resin Inside the Prints
Hollow prints with uncured resin inside may break as time passes. To ensure the durability of hollow prints, leave a weep hole at the bottom of your 3D design, so you can
empty the uncured resin easily.