User's Manual

-20-
Specification
Troubleshooting
Nobel Superfine Printer
When an error occurs, please refer to the service code on the printer and/or in the software, and check the suggestion below for troubleshooting. If any error persists,
please contact customer service center for support.
● Error Code 1001: Z axis motor upward movement abnormalities or Z axis top sensor malfunctioned
Suggestion:
Select "INFO">"SENSOR STATUS" on the printer, touch Z axis top sensor, and see if the status of "Z-T" switches from 0 to 1. If the value doesn't switch accordingly, then
the sensor is malfunctioning. Then select "UTILITIES">"MOVE PLATFORM">"TO TOP" to raise the . If the platform doesn't rise accordingly, then the motor is malfunction-
ing. Contact the service center after you have checked the status of the printer.
● Error Code 1002: Z axis motor downward movement abnormalities or Z axis bottom sensor malfunctioned
Suggestion:
Select "INFO">"SENSOR STATUS" on the printer, touch Z axis bottom sensor, and see if the status of "Z-B" switches from 0 to 1. If the value doesn't switch accordingly,
then the sensor is malfunctioning. Then select "UTILITIES">"MOVE PLATFORM">"TO BOTTOM" to descend the platform. If the platform doesn't descend accordingly,
then the motor is malfunctioning. Contact the service center after you have checked the status of the printer.
Print Technology
UV Light Source
Maximum Printing Area(W*D*H)
X/Y Axis Resolution
Z Axis Resolution
File Format
Connectivity
DLP(Digital Light Processing)
UV LED λ 405nm
64 *40 *120mm
50µm
25µm / 50µm / 100µm
.stl / XYZ format .3ws/.3wn
USB Cable & USB drive & WIFI
AC Input
Printer Dimension(W*D*H)
Net Weight
Print Material
OS Support
Operating Conditions
100-240V 50/60Hz, 24V/2.5A(60W)
290 * 357 * 426.5 mm
11 Kg
Photopolymer Resin
Windows 7, 8, 10
Mac OS X 10.9 / 10.10 / 10.11 / 10.12
Please ensure that the recommended operating
conditions are adhered to. (Operating temperature
20-30°C (68-86°F)/ humidity 40 ~ 60% RH; If a different
operating temperature is printed on the label on the
resin bottle, please adhere to recommended conditions
on the label.)