Operation Manual
Table Of Contents
- INTRODUCTION
- DISCLAIMER
- SAFETY AND COMPLIANCE
- 1. UNPACKING AND INSTALLATIONS
- 2. PRODUCT OVERVIEW
- 3. OPERATING THE PRINTER
- PRINT MENU
- RESIN MENU
- SETTINGS MENU
- Structure of the SETTINGS menu
- Platform
- General
- Adjusting the audio volume
- Changing the display language
- Structure of the Wireless icon
- Connecting to a Wi-Fi network
- Connecting to a hidden Wi-Fi network
- Structure of the Ethernet icon
- Enabling Ethernet connection
- Manually configuring Ethernet network
- Viewing the IP address
- PRINTING CONTROLS
- 4. OPERATING XYZprint AMUV
- SOFTWARE INTERFACE
- KEYBOARD SHORTCUTS AND MOUSE CONTROLS
- CONNECTING TO THE PRINTER
- COLOR DISPLAY OF OBJECTS
- PREFERENCE SETTINGS
- PREPARING THE FILES
- MANIPULATING MODELS ON THE WORKSPACE
- CONVERTING TO THE PRODUCTION FILES
- SAVING MODELS ON THE WORKSPACE
- SWITCHING THE VIEW OF THE WORKSPACE
- VIEWING THE INFORMATION OF THE MODELS
- SYSTEM VERSION AND UPDATE
Version 1.0
PartPro120 xP Operation Manual
5. Then, lock the quick release lever.
To install the Resin Bottle
1. Shake the resin bottle well to ensure even color. For the material with dense pigment, you may need to shake
the bottle for about 10 seconds.
2. Assemble the nozzle cap and the inner tube, and replace the original bottle cap with the assembled one.
Original Bottle Cap
3. Insert the resin bottle into the bottle slot and install the filling tubes (First, attach the black tube to the thick
hole. Then attach the transparent tube to the thin hole and push all tubes down.)
To check the resin information
The printer detects the information of the resin installed through the ID tag at the bottom of the resin cartridge.
Printing is not allowed when the cartridge is empty or when the material installed mismatch the resin selected
while exporting.
You can read the resin information on the printer screen and through the software XYZprint AM
UV
:
Using the printer screen:
From the main menu, tap [RESIN].
Bottle Slot
6