Operation Manual
Table Of Contents
- INTRODUCTION
- DISCLAIMER
- SAFETY AND COMPLIANCE
- 1. UNPACKING AND INSTALLATIONS
- 2. PRODUCT OVERVIEW
- 3. OPERATING THE PRINTER
- PRINT MENU
- RESIN MENU
- SETTINGS MENU
- Structure of the SETTINGS menu
- Platform
- General
- Adjusting the audio volume
- Changing the display language
- Structure of the Wireless icon
- Connecting to a Wi-Fi network
- Connecting to a hidden Wi-Fi network
- Structure of the Ethernet icon
- Enabling Ethernet connection
- Manually configuring Ethernet network
- Viewing the IP address
- PRINTING CONTROLS
- 4. OPERATING XYZprint AMUV
- SOFTWARE INTERFACE
- KEYBOARD SHORTCUTS AND MOUSE CONTROLS
- CONNECTING TO THE PRINTER
- COLOR DISPLAY OF OBJECTS
- PREFERENCE SETTINGS
- PREPARING THE FILES
- MANIPULATING MODELS ON THE WORKSPACE
- CONVERTING TO THE PRODUCTION FILES
- SAVING MODELS ON THE WORKSPACE
- SWITCHING THE VIEW OF THE WORKSPACE
- VIEWING THE INFORMATION OF THE MODELS
- SYSTEM VERSION AND UPDATE
Version 1.0
PartPro120 xP Operation Manual
ACCESSORIES LIST
Item Name Image Quantity Description
Platform
1
Resin gets cured on the platform when exposed to LED
light.
Scraper
For removing printed parts from the platform.
Gloves
1
Gloves should be worn to avoid direct contacting with
the printing materials.
Resin Bottle
1
500g of printing material for starting your production.
Nozzle Cap
1
For attaching filling tubes on the printer to the resin
cartridge.
Inner Tube
1
Attach the inner tube to the nozzle cap
Power Adapter
1
The exter nal power supply of the printer.
Always use the bundled power adapter on the product.
Power Cord
1
For connecting the printer to the electricity supply.
Always use the bundled power cable on the product.
USB Wire
1
For connecting the printer to the PC.
INSTALLATION SUGGESTIONS
Installation Environments
Make sure the installation site follows below conditions:
Power requirements: AC 100~240V 50/60Hz 60W
Operating temperature: 20-30°C (68-86°F)
Operating humidity: 40-80% RH non-condensing
Optimal Placement
Follow below guidelines when positioning the printer:
Place the printer on a leveled and solid surface, or resin level detection may be inaccurate.
9