Operation Manual

Version 1.0
PartPro120 xP Operation Manual
USER INTERFACE
The printing system is operated using the touch panel on the printer and the software “XYZprint AM
UV
”. You will
need to switch between the different interfaces based on your operation.
Refer to below table for the functions available on each user interface:
Category Function Touch Panel XYZprint AM
UV
File Preparation Preparing the files

Printing Controls
Printing new files

Printing from the history

Pausing the production

Resuming a paused task

Canceling the production

File Management Deleting files on the printer

System Configuration
Configuring printer settings

Configuring the connectivity

Updating printer firmware

Info Display
Production History

Printer Status
 
Material Status
 
System Version
 
Machine Statistics

TOUCH SCREEN
The printer screen shows the following menu when the system is ready. You can use the touch screen to print
from the history, adjust the printer settings, and view the information on the material installed and resin
temperature and system data.
The control panel functions are categorized under the following options in the main menu:
Main Menu Function
A Resin Temperature
Current temperature of the resin in the tank in degree Celsius. If the resin
temperature is lower than 25
℃
, the heating system will be triggered.
A
B
E
C
D
11