Operation Manual
Table Of Contents
- INTRODUCTION
- DISCLAIMER
- SAFETY AND COMPLIANCE
- 1. UNPACKING AND INSTALLATIONS
- 2. PRODUCT OVERVIEW
- 3. OPERATING THE PRINTER
- PRINT MENU
- RESIN MENU
- SETTINGS MENU
- Structure of the SETTINGS menu
- Platform
- General
- Adjusting the audio volume
- Changing the display language
- Structure of the Wireless icon
- Connecting to a Wi-Fi network
- Connecting to a hidden Wi-Fi network
- Structure of the Ethernet icon
- Enabling Ethernet connection
- Manually configuring Ethernet network
- Viewing the IP address
- PRINTING CONTROLS
- 4. OPERATING XYZprint AMUV
- SOFTWARE INTERFACE
- KEYBOARD SHORTCUTS AND MOUSE CONTROLS
- CONNECTING TO THE PRINTER
- COLOR DISPLAY OF OBJECTS
- PREFERENCE SETTINGS
- PREPARING THE FILES
- MANIPULATING MODELS ON THE WORKSPACE
- CONVERTING TO THE PRODUCTION FILES
- SAVING MODELS ON THE WORKSPACE
- SWITCHING THE VIEW OF THE WORKSPACE
- VIEWING THE INFORMATION OF THE MODELS
- SYSTEM VERSION AND UPDATE
Version 1.0
PartPro120 xP Operation Manual
[List View]
Start printing from the history
1. From the main menu, go to [PRINT], tap a history entry from the list view or thumbnail view.
Tap to enlarge the thumbview.
2. Review the printing settings. Tap [PRINT] to initial the production.
[PRINT] button is disabled while the system is reading the slicing
information from the history. Allow a few second before tapping the
[PRINT] icon.
If the resin bottle installed doesn’t match the resin type of the selected file, the system will highlight the
issue with a warning sign . Production is prohibited in this case.
Managing the printing history
1. From the main menu, go to [PRINT], and select a single entry (tap the checkbox before each entry) or select all
entries (tap the checkbox by the header).
[List View]
[Thumbnail View]
Tap to enlarge the thumbview
.
2. Tap the [Delete] icon, and following Tap [Confirm] to proceed to deletion.
[Thumbnail View]
Model_01
14