Operation Manual
Table Of Contents
- INTRODUCTION
- DISCLAIMER
- SAFETY AND COMPLIANCE
- 1. UNPACKING AND INSTALLATIONS
- 2. PRODUCT OVERVIEW
- 3. OPERATING THE PRINTER
- PRINT MENU
- RESIN MENU
- SETTINGS MENU
- Structure of the SETTINGS menu
- Platform
- General
- Adjusting the audio volume
- Changing the display language
- Structure of the Wireless icon
- Connecting to a Wi-Fi network
- Connecting to a hidden Wi-Fi network
- Structure of the Ethernet icon
- Enabling Ethernet connection
- Manually configuring Ethernet network
- Viewing the IP address
- PRINTING CONTROLS
- 4. OPERATING XYZprint AMUV
- SOFTWARE INTERFACE
- KEYBOARD SHORTCUTS AND MOUSE CONTROLS
- CONNECTING TO THE PRINTER
- COLOR DISPLAY OF OBJECTS
- PREFERENCE SETTINGS
- PREPARING THE FILES
- MANIPULATING MODELS ON THE WORKSPACE
- CONVERTING TO THE PRODUCTION FILES
- SAVING MODELS ON THE WORKSPACE
- SWITCHING THE VIEW OF THE WORKSPACE
- VIEWING THE INFORMATION OF THE MODELS
- SYSTEM VERSION AND UPDATE
Version 1.0
PartPro120 xP Operation Manual
SETTINGS MENU
The menu provides the control of platform movement, brightness and timeout of the screen, sound volume,
display language, connectivity settings, and show the system information.
Tap on [SETTINGS] in the top menu to go to system settings.
Structure of the SETTINGS menu
Platform
The system controls the movement of the platform in normal operating. In the case that you will need to move
the platform to the top or the bottom, follow the procedures below.
1. From the main menu, go to [SETTINGS] > [Platform], and select [Go Top] to move the platform to the top
or select [Go Bottom] to move the plate to the bottom.
Item Description
A
Position of the
platform
Use this function to move the
platform
B
General settings
For setting up display brightness
and timeout, audio volume,
display language, wireless and
Ethernet configuration.
C
System information
For checking system information,
system version, MAC address and
the accumulated print time.
D
Service mode
The function is password-
protected and limited to servicing
personnel only.
E Resin
This function is to show the resin
status.
F
Maintenance
This function is to show the
maintenance items.
B
C
A
D
E
F
16