Operation Manual
Table Of Contents
- INTRODUCTION
- DISCLAIMER
- SAFETY AND COMPLIANCE
- 1. UNPACKING AND INSTALLATIONS
- 2. PRODUCT OVERVIEW
- 3. OPERATING THE PRINTER
- PRINT MENU
- RESIN MENU
- SETTINGS MENU
- Structure of the SETTINGS menu
- Platform
- General
- Adjusting the audio volume
- Changing the display language
- Structure of the Wireless icon
- Connecting to a Wi-Fi network
- Connecting to a hidden Wi-Fi network
- Structure of the Ethernet icon
- Enabling Ethernet connection
- Manually configuring Ethernet network
- Viewing the IP address
- PRINTING CONTROLS
- 4. OPERATING XYZprint AMUV
- SOFTWARE INTERFACE
- KEYBOARD SHORTCUTS AND MOUSE CONTROLS
- CONNECTING TO THE PRINTER
- COLOR DISPLAY OF OBJECTS
- PREFERENCE SETTINGS
- PREPARING THE FILES
- MANIPULATING MODELS ON THE WORKSPACE
- CONVERTING TO THE PRODUCTION FILES
- SAVING MODELS ON THE WORKSPACE
- SWITCHING THE VIEW OF THE WORKSPACE
- VIEWING THE INFORMATION OF THE MODELS
- SYSTEM VERSION AND UPDATE
Version 1.0
PartPro120 xP Operation Manual
Wireless
3. The printer will obtain an IP address automatically. Tap [Ethernet] to view the IP settings. When IP settings
are available in this page, the network is ready.
Manually configuring Ethernet network
The printer is set to obtain an IP address automatically by default. However, if you are using the printer on a
network without DHCP, or want to prevent the printer's IP address from changing, you may specify IP address for
the printer. Check the corresponding settings with your network administrator.
Proceed to the following procedures after plugging the Ethernet cable to the Ethernet port at the back of the
printer.
1. From the main menu, go to [SETTINGS] > [General]. Tap the Ethernet connection icon to enable the
function. Skip this step if the icon is already shown in green.
2. Tap [Ethernet] to go to the configuration page. Tap [Static IP] to switch to manual configuration.
3. Set up [IP], [NetMask], [Gateway], and [DNS] respectively. Tap each field to open up the on-screen
keyboard.
In each input screen, tap the IP address field and input the IP address using the on-screen keyboard and tap
to apply the setting. Repeat the process until you have setting up the IP address of each item and
tap to exit the function.
21