Operation Manual
Table Of Contents
- INTRODUCTION
- DISCLAIMER
- SAFETY AND COMPLIANCE
- 1. UNPACKING AND INSTALLATIONS
- 2. PRODUCT OVERVIEW
- 3. OPERATING THE PRINTER
- PRINT MENU
- RESIN MENU
- SETTINGS MENU
- Structure of the SETTINGS menu
- Platform
- General
- Adjusting the audio volume
- Changing the display language
- Structure of the Wireless icon
- Connecting to a Wi-Fi network
- Connecting to a hidden Wi-Fi network
- Structure of the Ethernet icon
- Enabling Ethernet connection
- Manually configuring Ethernet network
- Viewing the IP address
- PRINTING CONTROLS
- 4. OPERATING XYZprint AMUV
- SOFTWARE INTERFACE
- KEYBOARD SHORTCUTS AND MOUSE CONTROLS
- CONNECTING TO THE PRINTER
- COLOR DISPLAY OF OBJECTS
- PREFERENCE SETTINGS
- PREPARING THE FILES
- MANIPULATING MODELS ON THE WORKSPACE
- CONVERTING TO THE PRODUCTION FILES
- SAVING MODELS ON THE WORKSPACE
- SWITCHING THE VIEW OF THE WORKSPACE
- VIEWING THE INFORMATION OF THE MODELS
- SYSTEM VERSION AND UPDATE
Version 1.0
PartPro120 xP Operation Manual
CONNECTING TO THE PRINTER
After plugging in the USB cable between the printer and the computer or completing the configuration of wireless
or Ethernet network on the printer, initial the connection with the following procedures:
1. Click the printer monitor on the lower right corner.
2. Wait while the software is scanning for the
available printers.
3. All available printers will be listed at the bottom of [My Printer].
Cable connected printers will be listed under [USB] while other
machines connected through wireless or Ethernet network under
[Network].
Find the targeted printer with its serial number or IP address, and
click [Connect] to initial the connection.
If the target device does not appear here, click [Scan] button to retry
searching for the device.
4. When the connection is set, [Connect]
button will change to [Connected]. You can
click to close the window and begin
other operation.
Layout Will Be Changed
Function Remain The Same
27