Operation Manual
Table Of Contents
- INTRODUCTION
- DISCLAIMER
- SAFETY AND COMPLIANCE
- 1. UNPACKING AND INSTALLATIONS
- 2. PRODUCT OVERVIEW
- 3. OPERATING THE PRINTER
- PRINT MENU
- RESIN MENU
- SETTINGS MENU
- Structure of the SETTINGS menu
- Platform
- General
- Adjusting the audio volume
- Changing the display language
- Structure of the Wireless icon
- Connecting to a Wi-Fi network
- Connecting to a hidden Wi-Fi network
- Structure of the Ethernet icon
- Enabling Ethernet connection
- Manually configuring Ethernet network
- Viewing the IP address
- PRINTING CONTROLS
- 4. OPERATING XYZprint AMUV
- SOFTWARE INTERFACE
- KEYBOARD SHORTCUTS AND MOUSE CONTROLS
- CONNECTING TO THE PRINTER
- COLOR DISPLAY OF OBJECTS
- PREFERENCE SETTINGS
- PREPARING THE FILES
- MANIPULATING MODELS ON THE WORKSPACE
- CONVERTING TO THE PRODUCTION FILES
- SAVING MODELS ON THE WORKSPACE
- SWITCHING THE VIEW OF THE WORKSPACE
- VIEWING THE INFORMATION OF THE MODELS
- SYSTEM VERSION AND UPDATE
Version 1.0
PartPro120 xP Operation Manual
Cone supports
Cone support is thicker than the original support. It is ideal for adding sprues at the base of castable prints. When
using cone support as the sprues, simply leave them on the prints for casting.
Cone support also provides better adhesion to the platform, making it helpful for holding the base of heavy
objects on the platform. When the cone support is added to the object, it’s recommended to sand it away for
better surface finish.
Structure of Cone Supports
To add cone supports
1. Select one or more object on the workspace and
click [Support] icon.
2. Select [Cone].
3. Adjust the diameter of the cone and click on the overhangs on the model to add cone marks.
To delete a cone mark, click on the orange dot to remove it.
When finished editing the supports, click [Generate] to add supports.
Item Description
A
Contact Area
A larger contact area may be required for
heavy objects.
B Top Diameter
Minimum diameter: 2mm.
C
Base Diameter
Minimum diameter: 3mm. The base
diameter of the support should be at least
1mm larger than the top diameter.
Layout Will Be Changed
Function Remain The Same
34