Operation Manual

Version 1.0
PartPro120 xP Operation Manual
To add tree supports
1. Select one or more object on the workspace and click
[Support] icon.
2. Select [Cone].
3. Set up the trunk.
Click on the desired location on the platform to add a trunk. To move a trunk, click and drag on the trunk. To
delete a trunk, click on it directly.
4. Set up the branches.
Switch to “Branch” setup. Click on the targeted trunk with a click on it. Click on the overhangs on the model
to add branches to the selected trunk.
To delete a branch, click on the thin stick to delete it.
Layout Will Be Changed
Function Remain The Same
Layout Will Be Changed
Function Remain The Same
Layout Will Be Changed
Function Remain The Same
36