Operation Manual
Table Of Contents
- INTRODUCTION
- DISCLAIMER
- SAFETY AND COMPLIANCE
- 1. UNPACKING AND INSTALLATIONS
- 2. PRODUCT OVERVIEW
- 3. OPERATING THE PRINTER
- PRINT MENU
- RESIN MENU
- SETTINGS MENU
- Structure of the SETTINGS menu
- Platform
- General
- Adjusting the audio volume
- Changing the display language
- Structure of the Wireless icon
- Connecting to a Wi-Fi network
- Connecting to a hidden Wi-Fi network
- Structure of the Ethernet icon
- Enabling Ethernet connection
- Manually configuring Ethernet network
- Viewing the IP address
- PRINTING CONTROLS
- 4. OPERATING XYZprint AMUV
- SOFTWARE INTERFACE
- KEYBOARD SHORTCUTS AND MOUSE CONTROLS
- CONNECTING TO THE PRINTER
- COLOR DISPLAY OF OBJECTS
- PREFERENCE SETTINGS
- PREPARING THE FILES
- MANIPULATING MODELS ON THE WORKSPACE
- CONVERTING TO THE PRODUCTION FILES
- SAVING MODELS ON THE WORKSPACE
- SWITCHING THE VIEW OF THE WORKSPACE
- VIEWING THE INFORMATION OF THE MODELS
- SYSTEM VERSION AND UPDATE
Version 1.0
PartPro120 xP Operation Manual
Material: Printing setup varies based on the color and
material of the resin. Please set the option based on the
resin bottle to be used.
It is advised to include color setting in filename for instant
distinction in the future.
Please note that printing will be stopped if the selected
resin type doesn’t match the resin installed.
Resin Model: [Resin Model] can be found under [RESIN]
on the printer screen and on the serial number label on
the resin bottle.
Layer Height: Layer Height indicates the resolution of a
print at Z axis.
Quality: The setting of Quality has impact on the
smoothness of the surface of the printout. Printing with
Good quality will take slightly longer than normal printing.
To Printer: Printing parameters vary from printer models.
Select [PartPro120 xP] for using this printer.
Reduce Facets: Complex 3D models are composed of a
large amount of meshes. Enable this function for slicing
such models may save the render time as it will reduce the
facets to 200 thousand elements. This function can also
repair the 3D model when necessary.
Starting a printing task
New files can be sent to the printer via USB connection, wireless connection or Ethernet connection.
To start a new printing task:
1. Initial the connection through [Printer Monitor]. Refer
to P.27.
2. Press [Print] icon on the top bar.
3. Printout setting window (options are the same as the
[Export] function) will pop up. Set your printing
preference based on the features of the objects and hit
[Print] to proceed.
SAVING MODELS ON THE WORKSPACE
Models on the workspace can be saved in .stl or .3ws format for future used.
After saving the workspace in .stl format, further adjustment to a single object is prohibited as all models are
combined as a single file.
Unlike .3ws project file, XYZprint AM
UV
memorizes the geometry, orientation, placement, dimensions and the
support settings of each model. Once importing the .3ws file on to the workspace, you can still edit each object
with XYZprint AM
UV
.
Layout Will Be Changed
Function Remain The Same
38