Operation Manual

Version 1.0

PartPro150 xP Operation Manual

Connecting to a hidden Wi-Fi network

1. From the main menu, go to

[SETTINGS] > [General].

2. Tap the wireless connection icon

to enable the function. Skip this

step if the icon is shown in green.

3. Tap [Wireless] to enter the setting.

4. Swipe to the bottom of the list of

available Wi-Fi connections, and

tap [Add Network].

5. Enter the exact name of the network in the [Network Name] field and tap

to go back to the setting page.

6. Tap [Security] dropdown list and choose the security type. If you're not sure about the security of your network, check

with your network administrator.

7. Enter the network password in the [Password] field, and tap to join the network.

8. Connection is set up when the hidden network is added to the list with a tick appears at the left side. Tap to exit the

function.

9. Once Connect to Wifi, the right side top of the main menu will appear a client IP address icon.

XYZ-00001

*********

***|

XYZ-0001

WPA/WPA2 PSK

XYZ-0001

None