Operation Manual

Controls and Indicators

6 7

1 POWER OFF/ VOL

Rotary encoder.

Press the encoder to turn on the unit, press and hold it to turn off.

Rotate clockwise/counterclockwise to adjust the volume.

Press to enter the audio adjust menu when the unit is on.

2 EJECT

Press the button once to eject the disc.

Hold to reset the loading mechanism.

3 SRC

Press the button to select a playing source.

4 PLAY/PAUSE

Press and hold to toggle traffic announcements.

5 OPEN

Press the button to activate the motorized system and move the TFT monitor into the

viewing position.

Press again to close the TFT.

6 ANGLE-

Press to adjust the downward tilt angle of the screen one step at a time.

Press and hold to continuously adjust the downward tilt.

Press to adjust the picture settings in picture setup.

7 ANGLE+

Press the button to adjust the upward tilt angle of the screen one step at a time.

Press and hold to continuously adjust the upward tilt.

Press to adjust the picture settings in picture setup mode.

8 AUX-IN

Audio only

9 SMART DIAL

Rotary encoder.

Press the encoder to access the MAIN menu.

Rotate clockwise/counterclockwise to select a desired item and press to access or confirm.

10 DISK SLOT

11 TFT DISPLAY

12 RESET

Press the button with the tip of a ball-pen to reset the unit.

I Do not touch the moving components when you are opening or closing the monitor.

If you touch the moving part, you may be hurt or the unit may be damaged.

I Do not try to open or close the monitor by hand.

1 2 3 4 5 6 7 8 9

Button Operation