Operation Manual

enGLIsH

oPeratInG InstruCtIons

Power On/Off

Press the POWER/VOL button to turn the unit on. You can also turn on the unit by

pressing the button (

) on the remote.

Press and hold the POWER/VOL button on the front panel or press the POWER button

(

) on the remote to power off the unit.

Playing Source Selection

Press the MENU button on the front panel and use SMART DIAL to select; or the (SRC)

button on the remote to change among available playing sources: TUNER, DISC, AUX

IN 1, AUX-IN 2, CAMERA, NAVI, USB and SD Card. The playing mode is displayed on

the TFT display.

AUX IN Mode

An external audio/video device can be connected to this unit via RCA cables (front jack

or rear RCA connector) to the "AUX-IN".

CAMERA Mode

"CAMERA" mode is only available when the camera is connected and when backing up.

To install a rear view video camera, connect the CAMERA video input cable to the rear

view camera output cable.

NOTE: You have to connect the REVERSE cable to enable automatic switching.

If you have not connected a device to the unit, the source can not be selected.

Example: If you have not inserted an SD into to the unit, SD will not be available.

Volume Adjustment

To increase or decrease the volume level, turn the POWER/VOL on the front panel or press

the VOL+/ VOL- buttons on the remote control. The volume ranges from "0" to "40".

Audio Control Menu/EQ

The audio control feature allows you to easily adjust your audio system to meet the

acoustical characteristics of your vehicle, which vary depending on the type of vehicle

and its measurements. To get the best possible sound quality from your new system,

be sure to adjust the settings for the speakers as well. Proper setting of the fader and

balance boost the effects of the cabin equalizer.

Accessing the Audio Control Menu/EQ

Press the POWER/VOL button on the front panel or press the (SEL) button on the remote

control to display the "Audio" menu.

Selecting an Audio Feature for Adjustment

Press the ( / ) buttons on the remote or press the POWER/VOL button on the front

panel once to select a audio feature to be adjusted.

Adjusting an Audio Feature

Press the (/) buttons on the remote or rotate the POWER/VOL clockwise/

counterclockwise to adjust the selected feature to the desired setting.

XT8020_MANUAL UK+DE.indd 11 03.12.2008 16:14:43 Uhr