Operation Manual

Tuner
tuner mode
Operation buttons
1) Source Tap to return to Main Menu
2) AF Tap to turn on/off AF function
3) TA To to turn on/off TA function
4) REG Tap to turn on/off regional function
5) NEXT Tap to jump to next available station
6) PREV Tap to jump to previous available station
7) AS Tap to perform automatic station memory
8) BAND Tap to switch radio band (FM1 →FM2 → FM3 → AM1 →AM2 )
9) SCAN Tap to have a peek of each preset. Tap again to turn off SCAN
10) Adjust up Tap to adjust frequency 50kHz up
11) Adjust down Tap to adjust frequency 50kHz down
12) Preset Tap to select Preset
Tap and hold to save current frequency as Preset
Information fields
13) BAND Indicates current BAND
14) Frequency Indicates current frequency
15) PS Program station – shows station name, if available
16) Radio text Shows radio text, if available
17) Clock time Shows clock time
10
Note:
n Selected and active items are highlighted in red.
n This unit features an RDS tuner. RDS is a system which transmits data on top of the FM radio
signal. Availability and content of the RDS data depend on the respective broadcast station and
its signal strength. RDS does, for example, transmit alternative frequencies, which allow for
frequency changes without user interaction. AM band doesn´t support any RDS function.
n You need to have the AF function activated in order to use the RDS functionality and features.
However, the AF function is deactivated ex factory. We recommend to activate AF directly after
first power up of this device.
11
1
2
3
4
5
6
7
8
9
10
11
12
14
15
16
17
13