User's Manual

Camera Setup

From the home page click settings and enter the administrator user name and password. Click on Camera

Setup under the title Camera to change the image and audio parameters of the camera.

[Image size] Three image resolutions available: 640 x 480(VGA), 320 x 240(QVGA), 160 x 120.

[Frame rate] Twelve options: 1/2/3/4/5/6/8/10/15/20/25/30 frames per second (fps).

[Bit rate] Eight options: 64, 128, 256, 512, 768, 1024, 1536, 2048 (kbps).

The above three settings determine the image quality, however higher bit rates require greater bandwidth.

Please select the appropriate settings according to your connection speed and network traffic. If you are

experiencing jerky video it may be necessary to decrease the bit rate.

[Light Frequency] Two options: 50Hz & 60Hz. Set according to the mains frequency in the country of use.

For UK this would be 50Hz.

[Image rotation] Display images upside down.

[Show FPS]Show FPS On/Off.

[Microphone] Turn on/off the built-in microphone.

[Mic volume] Adjusts the volume of the microphone from 0~14 where 0 is the lowest.

[Audio bit rate] Four options: 16, 24, 32, 40(kbps). Determines the quality of the audio being transmitted.

Click Apply to confirm your settings.