User's Manual

PPPoE Setup

The IP207W can be installed without a PC on the network. Some XDSL services use PPPoE

(Point-to-Point Protocol over Ethernet).

[PPPoE dial-up] Enable or disable PPPoE connection.

[E-Mail notification] If enabled, it will notify you of the IP address of the IP207W. You must set the relevant

parameters in the e-Mail Setup window under Alarm heading.

[Service name] Either an ISP name or a class of services that is configured on the PPPoE server. This field

may be left empty.

[User name] Type the user name.

[Password] Type the password.

[Re-type password] Re-confirm the password.

Click Apply to confirm your settings.