User's Manual
Table Of Contents
- Main Features
- Physical Description
- Installation
- Network Camera Screen and Setup Window
- Viewing the camera from your mobile phone
- Network Camera Setting Interface
- Camera
- Network
- Alarm
- Storage
- Tools
- SPEEDREAD YOUR NETWORK CAMERA
- ADVANCED SETTINGS
- Connected directly to a Computer
- SPECIFICATIONS
- TROUBLESHOOTING
- GLOSSARY OF TERMS
65
Backup or Reset
[Reset] Click Reset to initialize the camera to default factory setting. All users and settings will be
lost, requiring you to reconfigure the camera.
[Backup] Click Backup to backup the current configuration of the camera for future reference.
[Browse...] Click Browse... to search for a backup configuration you wish to upload to the camera, then
click Restore.
Note:
Do not turn off the power during the Reset, Backup or Restore functions since this might corrupt the
camera’s firmware
Tip:
The camera can also be reset to the default settings by pressing the reset switch on the side of the camera.