User's Manual

October 13, 2014
Network Card Reader CONFIDENTIAL 6
2.1 SYSTEM OVERVIEW
The purpose of Ethernet Reader is to handle user authentication and authorization to the device
using card.
User can use also the PIN authorization (using the MFD integrated panel).
Only selected card readers are supported by Ethernet Reader.
The Ethernet Reader is equipped with a 2-ports network switch and so it is not necessary to provide another
Ethernet socket for connection - the copier or printer can be connected via the terminal. It features a
microcomputer, flash ROM, network interface and a card reader.
Terminal is powered by external power supply that is also included in installation package.
The emergency button is used for reset the terminal into default settings.