User's Manual

October 13, 2014
Network Card Reader CONFIDENTIAL 8
3 TERMINAL'S CONFIGURATION
Ethernet Reader requires TCP/IP connection to the YSoft SafeQ server. Ethernet Reader has own IP and
MAC address.
For the proper network configuration you can use:
SafeQ Terminal Configuration utility (terminal config) or
Configuration utility for hardware terminals (termtool)
There is a default network configuration used for Ethernet Reader:
DHCP=0
IP=192.168.0.100
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
DNS=192.168.0.254
SERVERIP=192.168.0.254:5011
SERVERUPD=192.168.0.254:4096
The SERVERIP corresponds to the IP address and port of the YSoft SafeQ® Terminal Server. The IP and
port are used for card authentication.
The SERVERUDP corresponds to the SafeQ server and serves for firmware updates.