User's Manual

Chapter 4. Installing the terminal
14 YYSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE
Step 4. Configure the connection between the terminal
and the SafeQ server
Display the site admins Service menu
If you are using YSoft SafeQ Instant or Professional Edition:
Display the site admins Service menu as described on page 29.
If you are using YSoft SafeQ Enterprise Edition and will need to configure cluster support:
Display the Y Soft partners Service menu as described on page 31.
NOTES:
The options available on the Service menu vary according to the type of access
you have and other variables.
The options are similar to those for earlier versions of the terminal, with a few
differences, such as the locations of certain options on menus.
Configure the terminal’s network settings
Refer to the information you entered on page 10 as you follow the steps in this section.
1 Touch Server settings.
2 Touch Find server.