User's Manual

Chapter 4. Installing the terminal
26 YYSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE
Step 7. Mount the terminal
Depending on the type of bracket included with the terminal, mount the bracket to the
MFP, to the wall, or to a nearby object such as a desk or table.
To mount the terminal onto the MFP, follow these steps:
1 Remove 2 screws from the back of the terminal.
2 Attach the mounting bracket to the terminal.
3 If you have not already done so, write down the terminal’s serial number (located on
the back of the terminal).
4 Use the screws and washers included with the mounting bracket to mount the
bracket and terminal onto the MFP.