User's Manual

Chapter 4. Installing the terminal
28 YYSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE
Step 8. Verify installation
Before you verify installation:
If a user (with associated card or PIN) has not been created in SafeQ, create one now for
testing purposes as follows:
1 In the SafeQ Web Interface, add a new user named “test.”
2 Assign a card and a PIN to the test user (for example, PIN 1111).
NOTE: For exact instructions, see the YSoft SafeQ Installation and Administration
Guide for your edition of SafeQ Server.
If the terminal does not include a card reader:
1 On the terminal’s PIN entry screen, touch 1111 (or whatever PIN you assigned to the
test user); then touch OK.
2 Check to make sure the MFP panel unlocks (that is, the panel lights up and
comes on).
If the terminal includes a card reader:
1 Touch the PIN button to display the PIN entry screen.
2 Touch 1111 (or whatever PIN you assigned to the test user); then touch OK.
3 Check to make sure the MFP panel unlocks (that is, the panel lights up and
comes on).
If the MFP unlocks and the user is authenticated:
Installation is now complete.
If the MFP does not unlock:
Submit a problem report to Y Soft as described on page 7, and provide the following
information (see page 10):

Terminal serial number

Printer/MFP serial number