User's Manual

Chapter 5. Changing settings
40 YYSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE
Testing the I/O Module
Test to see if the control cable interface (also called the blocking cable interface)
is functioning, as follows:
1 Display the Y Soft partners Service menu (see page 31).
2 Touch I/O Module settings.
3 Touch I/O Module test.
4 Select one of the following options and perform the associated test. The terminal
displays information received from the MFP.
Locked—Select this option; then see if the MFP is locked.
Unlocked, BW copies only —Select this option; then see if the MFP is unlocked and only
permits B/W copies.
Unlocked, Color copies—Select this option; then see if the MFP is unlocked and permits
both B/W and color copies.