User's Manual

Chapter 5. Changing settings
42 YYSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE
Changing terminal interface settings
1 Display the site admins Service menu (see page 29).
NOTE: If you are going to change the Interaction mode, you must display the
Y Soft partners Service menu (see page 31).
2 Touch Interface settings.
The Interface settings menu opens.
3 Select options as follows:
Sound
For beeps to sound when terminal buttons are touched, select on.
To turn off beeps, select off.
Validation method
Select one of the following validation methods:
ID Card only – User only needs to swipe a card.
PIN only – User only needs to enter a PIN.
ID Card and PIN – User must swipe a card, then enter a PIN.