User's Manual

Chapter 5. Changing settings

YSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE 431

ID Card or PIN – User can choose to either swipe a card or enter a PIN.

PIN or Login – User can choose to either enter a PIN or a login name and password.

(Requires SafeQ Professional or Enterprise v.3.6.1 and higher.)

(ID Card and PIN) or Login – User can choose to either swipe a card and enter a

PIN, or enter a login name and password.

ID Card or PIN or Login – User can choose any of these methods:

 Swipe a card.

 Enter a PIN.

 Enter a login name and password.

Job list mode

Select one of the following job list modes:

No job list – The terminal does not display a Job List option; users cannot view

jobs at the terminal.

Queue only – The terminal displays a Job List option. When users select it, they

see a list of only jobs in the print queue. They can select jobs they want to print

or delete.

Queue/printed – The terminal displays a Job List option. When users select it,

they can view jobs that are ready to print (highlighted) and jobs that have been

printed.

Queue/printed/favorites – The terminal displays a Job List option. When users

select it, a submenu appears from which the user can select the jobs they want

to see: jobs in the print queue, printed jobs, or the user‘s favorite jobs.

Temporarily disabled – The terminal displays a Job List option. When users

select it, they see a message that the administrator has disabled the Job List

feature; users cannot view jobs at the terminal.

Interaction mode

NOTE: To change the Interaction mode, you must display the Y Soft partners

Service menu (see page 31).

Select one of the following interaction modes:

Normal—After login, the terminal displays the Main menu.

Simplified—After login, if the user has any jobs waiting, they are immediately

printed and the user is automatically logged off.

If the user has no jobs waiting, the terminal displays only the Copy menu.