User's Manual

Chapter 5. Changing settings
YSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE 451
Info dialogs timeout
Select the maximum length of time with no user input the terminal will display
information screens:
2 seconds
5 seconds
10 seconds
20 seconds
Copy dialog timeout
Select the length of time with no copy activity before the terminal automatically
logs the user out (applies only to the time before the first copy is made):
20 seconds
60 seconds
None (default)—SafeQ Server determines the timeout period.
Main menu after P/C
Enabled (applicable only if the terminal includes a card reader):
When a print/copy operation is complete and the user’s card is still present
at the reader, the terminal displays the Main menu and the user stays
logged in—the session does not end until he/she touches the End button.
NOTE: "Enabled" is supported only by Smartcard reader, Mifare reader in
Continuous mode, or HID Continuous reader.
Disabled (default):
When a print/copy operation is complete, the user is logged out and the
print/copy session is ended.
Show P/C alert messages
Enabled (default) – Print and copy screens will display warning messages from the
server.
Disabled – Print and copy screens will not display warning messages from the server.