User's Manual

Chapter 8. Updating terminal firmware
YSOFT SAFEQ TERMINAL PROFESSIONAL INSTALLATION AND ADMINISTRATION GUIDE 631
7 Use either of these methods to invoke the firmware update:
Method 1: Invoking the firmware update from the Service menu
a Display the Y Soft partners Service menu (see page 31).
b Touch Service.
c Touch Emergency update.
The terminal reboots.
Method 2: Invoking the firmware update during power up
a Power off the terminal.
b Power on the terminal.
c Immediately touch and hold your finger on the lower left corner of the terminal
screen.
d Continue to hold your finger there until the terminal asks you to confirm the
emergency update.
The update process can take several minutes, depending on the connection. The
terminal Service menu indicates when the update is complete.
You have now successfully upgraded the terminal firmware.