User's Manual

18.01.2011
YSOFT SAFEQ USB CARD READER V2 – ADMINISTRATOR’S GUIDE V1.2 [EN] 4/22
1 INTRODUCTION
1.1 PURPOSE OF DOCUMENT
This documentation provides essential information on installation and configuration of YSoft SafeQ® USB Card
Reader verison 2.
1.2 VALIDITY OF DOCUMENT
This document applies to YSoft SafeQ® USB Card Reader v2.
1.3 GOALS AND OBJECTIVES
The YSoft SafeQ® USB Card Reader v2 that could be simply connected to the multi-functional device and serves
for user authentication using card. Card must be assigned to any user in the YSoft SafeQ system. After the
successful authentication the user is able to manipulate with device and perform his print jobs, copy jobs or
scan jobs (depends on the device).
The YSoft SafeQ® USB Card Reader v2 could be also connected to workstations and can be used with the credit
charger application or with the SQ client for authentication.
1.4 COMPATIBLE DEVICES AND SYSTE M REQUIREMENTS
Compatibility with following YSoft SafeQ editions is guaranteed:
 YSoft SafeQ PCAS 3.1.5.16 and newer
 YSoft SafeQ PCAS 3.5 Instant Edition
 YSoft SafeQ PCAS 3.2.43m
 YSoft SafeQ PCAS 3.3
 Possible vendors MFD’s allow connection between USB readers
Note1: Each vendor device has specific steps needs to be activated on the machine before connection of
USB reader v 2 to work with machine.
Note2: Support of USB serial mode possible only from Windows XP SP2 or Windows 2003 SP1
1.5 TERMS AND ABBREVIATIONS
MFD
Multi-Functional Device
USB Card Reader v2
YSoft SafeQ® USB Card Reader version 2