User's Manual

4.9.2009
YSOFT SAFEQ TERMINAL ULTRALIGHT  ADMINISTRATORS GUIDE V1.5 [EN] 11/19
Picture 7 - SafeQ Terminal Configuration util
When you start this tool and press on Scan button, the tool discovers all the terminals in the same network
(independently on the network settings), see Picture 8. You can change settings for the particular terminal in
the list and using Save button the configuration is applied. Upon successful configuration change the terminal
will be rebooted.
Picture 8 - Terminal UltraLight configuration
There is a default network configuration used for Terminal UltraLight:
 DHCP=0
 IP=192.168.0.100
 NETMASK=255.255.255.0
 GATEWAY=192.168.0.254
 DNS=192.168.0.254
 SERVERIP=192.168.0.254:4096