User's Manual

4.9.2009
YSOFT SAFEQ TERMINAL ULTRALIGHT  ADMINISTRATORS GUIDE V1.5 [EN] 13/19
4 TERMINAL FIRMWARE
4.1 SERVICE FIRMWARE
Service firmware is the most important part of the terminal firmware. Right after power-up it will check the
emergency button if any action is required. Then it will check the normal firmware for integrity. If the normal
firmware is not valid then the emergency firmware will connect to server in emergency mode and download
the firmware. If the normal firmware integrity is ok, then it is started.
4.2 TERMINAL FIRMWARE
Terminal firmware is the main part of the firmware. It initializes network, autodetects readers and sends the
card number to the server when card is placed. By default the firmware starts UDP locator server which will
help detecting available terminals on the local network. Also the TCP configuration server is started.
4.3 FIRMWARE UPDATE
The following line must be added to conf/modules/safeQ.fwupdate.conf file on the SafeQ server for
the emergency update of Terminal UltraLight:
update-fw-ulemergency = update_file_with_ultralight_firmware
Example (it is similar to Terminal Professional):
update-fw-0.7.0ul = ultralight-0.8.fw