User's Manual

4.9.2009
YSOFT SAFEQ TERMINAL ULTRALIGHT  ADMINISTRATORS GUIDE V1.5 [EN] 7/19
Picture 4 - Terminal UltraLight (Print & Copy version)
The Terminal UltraLight is equipped with a 2-ports network switch and so it is not necessary to provide another
Ethernet socket for connection - the copier or printer can be connected via the terminal. It features a micro-
computer, flash ROM, network interface and a card reader.
Terminal is powered by external power supply that is also included in installation package.
The emergency button is used for reset the terminal into default settings.
2.2 CAPACITIVE KEYBOARD
Capacitive touch keyboard utilized in the Terminal UltraLight is the latest technology providing better reliability
and endurance than standard micro switch or membrane keyboards. The keyboard senses capacitance change
on electrodes below the keyboard label. The bigger capacitance change the better the keyboard recognizes the
touch. It is not important how strong user presses the button it is important to touch larger area. Each key
press is signalized by a short beep (if beeps are enabled and use of given key is applicable at the moment).
For reasons above some requirements need to be met for proper operation:
 Use fingerpads instead of fingertips. Fingerpads cover larger area and are much better detected than
fingertips.
 Using of force is irrelevant, it is absolutely enough to gently place the finger on the keyboard.
 The keyboard will not work when touched by non-conductive materials or materials with very small
capacitance. Such materials include nails, plastic, styluses, pens, screwdrivers etc.
 The keyboard will not work when wearing gloves. Some exceptions to this may however apply to latex
gloves used in medicine or food industry.