User's Manual

4.9.2009
YSOFT SAFEQ TERMINAL ULTRALIGHT  ADMINISTRATORS GUIDE V1.5 [EN] 9/19
3 TERMINAL INSTALLATION AND CONFIGURATION
To install the Terminal UltraLight, please following four steps in the order mentioned:
- connect the ethernet cables (Chapter 3.1),
- use the mounting kit to fix the terminal on a suitable place - mostly on the side of MFD (Chapter 3.2),
- adjust the Terminal UltraLight settings (chapter 3.3)
- and activate an external copying control interface of copier/MFD device (only for Terminal UltraLight 
Print & Copy edition).
3.1 CONNECTING CABLES
Terminal UltraLight requires TCP/IP connection to the YSoft SafeQ server. Terminal has own IP and MAC ad-
dress.
Picture 5 - Interface of Terminal UltraLight – Print & Copy