User's Manual
6.12.2010
YSOFT SAFEQ ETHERNET READER ADMINISTRATORS GUIDE V1.3 [EN] 11/17
4 SAFEQ CONFIGURATION
After the Ethernet Reader is properly configured, it must be connected to the Y
Assume that the Y server and Y Once
the Ynd connected to the Y
the SafeQ.
1. Authenticate into SafeQ as administrator.
2. Select the secure queue automatically created by the YPicture 6):
Queues and devices > Queues and terminals
Picture 6 - Queue configuration
3. Insert the serial number of the Ethernet Reader into the SN/IP field (see Picture 7).