User's Manual

6.12.2010
YSOFT SAFEQ ETHERNET READER  ADMINISTRATORS GUIDE V1.3 [EN] 6/17
Picture 2 - Ethernet Reader
The Ethernet Reader is equipped with a 2-ports network switch and so it is not necessary to provide another
Ethernet socket for connection - the copier or printer can be connected via the terminal. It features a micro-
computer, flash ROM, network interface and a card reader.
Terminal is powered by external power supply that is also included in installation package.
Picture 3 - Interface of Ethernet Reader
The emergency button is used for reset the terminal into default settings.
2.2 ETHERNET READER SPECIFICATION
Parameter
Value
Identification
Using a card reader
Network
2-port 10/100 Mbit switch (auto MDI/MDIX)
Processor
Freescale Coldfire v2
Memory
64kB RAM, 512kB Flash