User's Manual

18.01.2011
YSOFT SAFEQ USB CARD READER V2 – ADMINISTRATOR’S GUIDE V1.1 [EN] 14/22
USB serial – Optional mode
This mode emulates operation of COM port and can be switched to mode 1 only.
On Windows platform the installation of the USB reader in this mode requires usb2-reader.inf file. This file is
distributed along with the usbrdrtool application and should be selected in the "new hardware" wizard after
the USB reader plugging/reconfiguration.
On Linux platform the driver for the serial port is installed automatically.
Card testing in usbrdrtool application will work in this mod
4.3 ACTION 3 SETTING CARD READER PROTOCOL
When you are on the main page select appropriate number of the reader. If you want to change card reader
protocol for specified reader type (selected number), then you need to open the value 3 “Set card reader pro-
tocol”
Picture 8 - Selecting of card reader
To choose appropriate reading protocol, please see Y Soft Card Readers Protocols.pdf for more details about
card reader protocols. This*. pdf file is always attached to the zip file with released FW of the USB reader.
Select the number and confirm by “enter” confirmation.