User's Manual

VX-920/-970 SERIES OPERATING MANUAL
9
OPERATION
Preliminary Steps
 Install a charged battery pack
onto the transceiver, as de-
scribed previously.
 Screw the supplied antenna
onto the Antenna jack. Never
attempt to operate this trans-
ceiver without an antenna con-
nected.
 If you have a Speaker/Micro-
phone, we recommend that it not be connected
until you are familiar with the basic operation of
the VX-920/-970.
Operation Quick Start
 Turn the top panel’s
VOL/PWR knob clock-
wise to turn the radio on.
 Turn the top panel’s CH
selector knob to choose
the desired operating
channel. On the 16-key
and 4-key versions, a
channel name will appear
on the LCD.
 If you want to select the operating channel from
a different Memory Channel Group, press the Pro-
grammable key (assigned to the Memory Group
Up or Down function) to select the Memory Chan-
nel Group you want before selecting the operat-
ing channel. A Group name will appear on the LCD
whenever the Programmable key is pressed.
Note: Some models are programmed so that the
operating channels are selected by the Program-
mable key and the memory channel group is se-
lected by the CH selector knob. For further de-
tails, contact your VERTEX STANDARD dealer.
 
Vertex Standard Co., Ltd.
FCC ID: K6610334620/IC ID: 511B-10334620